Neopost IN-360 User Manual page 46

| Page 39 | Nov-04-2015 12:27 |
In other modes (Manual Weight Entry
From the [Standard] home screen:
1. Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, with the side to be
printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
3. The Mailing System applies postage and the envelope is ejected.
Applying Postage for [Manual Amount Entry] Mail
Sequence of Settings for [Manual Amount Entry] Mail
The procedure below outlines steps to enter the postage amount manually.
The sequence is identical to
the following:
• Postage must be set manually to the desired amount.
Make sure you have already completed the preparation steps
mentioned in
27.
, no weight ...):
Applying Postage for Standard Mail
Preparing and Starting your Work Session
on page 33, except for
on page
39
3