Neopost IN-360 User Manual page 39

| Page 32 | Nov-04-2015 12:27 |
Frequently Asked Questions
System check list:
Question...
Do I have enough postage?
3
Do I need to clear the Batch
Counter?
Is the sealing/moistening device
properly filled?
(if installed)
Is the Weighing Platform properly
zeroed or tared?
Is there enough ink in the cart-
ridge?
32
Answer
Press
To add funds, see
(Meter) on page 67.
Clear batch counters if you intend to issue a report
on the mail run you are about to start (see
Report on page 96).
See How to Reset Batch Counters
For sealing while printing the envelopes.
For moistener-equipped hand-feed tables, see
the Moistener Option
Before laying envelope(s) on the weighing platform,
your home screen should display 0 g. If _ g is dis-
played, perform a 'rezero' of the WP.
See How to Rezero the Weighing Platform
136.
To display the level of ink in the printing headset, see
How to Display Ink Level and Cartridge Data
168.
You can be warned when the available funds gets below a preset
value (see How to Set the Low-Funds Threshold
and enter 1 to check your funds balance.
How to Add Funds to the PSD
on page 62.
on page 175.
on page 131).
Batch Data
Filling
on page
on page