Enabling/Disabling Sounds; How To Enable / Disable The Beeps; How To Change The Beeps By Default - Neopost IN-360 User Manual

| Page 126 | Nov-04-2015 12:27 |
8.4

Enabling/Disabling Sounds

You can enable or disable the system beeps separately:
• Beeps on keys
• Beeps on warnings and errors

How to Enable / Disable the Beeps

To enable or disable the beeps:
1. As a user:
Press
8
2. Select Beep on key and/or beep on error check boxes.
3. Press [OK] to validate.
Setting Default System Beeps
You can set the default beep state for user sessions.

How to Change the Beeps by Default

To change the sounds by default:
1. As supervisor (see
Press
ences Sounds
2. Check Beep on key and/or Beep on error to enable the sounds.
3. Press [OK] to validate.
126
and select the path: Preferences
This is a user setting that only lasts as long as you are logged in.
How to Log in as Supervisor
and select the path: Default user settings
Sounds
on page 122):
Default user prefer-