Download  Print this page

Additional Printer Setup; Installing Internal Options - Dell B5460dn Mono Laser Printer User Manual

User's guide.
Hide thumbs

Advertisement

Table of Contents

Additional printer setup

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and then unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then
turn them off as well, and unplug any cables going into the printer.
Available internal options
Note: Some options are available only in select printer models. For more information, contact the place where you
purchased your printer.
Memory card
DDR3 DIMM
Flash memory
Fonts
Firmware cards
Forms barcode
PRESCRIBE
IPDS
Printcryption
Printer hard disk
Internal Solutions Ports (ISP)
Accessing the controller board
Note: This task requires a flathead screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
1
Remove the controller board access cover.
1
2
14

Advertisement

Table of Contents

   Also See for Dell B5460dn Mono Laser Printer

   Related Manuals for Dell B5460dn Mono Laser Printer

Comments to this Manuals

Symbols: 0
Latest comments: