Daikin CMSQ200A7W1B Service Manual page 104

SiBE28-805
BRC7F Type
1. When in the normal mode, push "
BRC4C Type
2. Set mode No. "00" with "
3. Set the group No. for each group with "
4. Enter the selected group numbers by pushing "
5. Push "
Group No. Setting
Example
Indoor/Outdoor Outdoor/Outdoor
F1 F2
Caution When turning the power supply on, the unit may often not accept any operation while "88" is
displaying after all indications were displayed once for about 1 minute on the liquid crystal
display. This is not an operative fault.
Test Operation
Group No. setting by wireless remote controller for centralized control
enters the "field set mode."
" button and return to the normal mode.
F1 F2
F1 F2 P1 P2 F1 F2 P1 P2
RC
Main
1-00
F1 F2 P1 P2 F1 F2 P1 P2
No Remote Controller
1-03
" button for 4 seconds or more, and operation then
" button.
" "
Indoor/Outdoor Outdoor/Outdoor
F1 F2 F1 F2
F1 F2 P1 P2
RC RC RC
Sub
1-02
1-01
F1 F2 P1 P2
RC
1-04
" button (advance/backward).
" button.
Centoral Remote
Controller
F1 F2
F1 F2 P1 P2
Group Control by Remote Contoller
(autmatic unit address)
F1 F2 P1 P2
Field Setting
93