System Configuration - Daikin CMSQ200A7W1B Service Manual

Option List

System Configuration

No. Item
1 Residential central remote controller
2 Central remote controller
2-1 Electrical box with earth terminal (3 blocks)
3 Unified ON/OFF controller
3-1 Electrical box with earth terminal (2 blocks)
Noise filter (for electromagnetic
3-2
interface use only)
4 Schedule timer
For SkyAir,
FD(Y)M-FA,
Interface adaptor for
5 FDY-KA
SkyAir-series
FDYB-KA,
FVY(P)J-A
Central control For UAT(Y)-
6
adaptor kit K(A),FD-K
7 Wiring adaptor for other air-conditioner
8 DIII-NET Expander Adaptor
8-1 Mounting plate
Note:
1. Installation box for * adaptor must be obtained locally.
2. For residential use only. Cannot be used with other centralized control equipment.
Building Management System
No.
Hardware intelligent Touch
1 Basic
1-1 Hardware DIII-NET plus adaptor
1-2
Option
Software
1-3
1-4 Electrical box with earth terminal (4 blocks)
2 Basic Hardware
2-1
2-2 Option Software
2-3
2-4 Optional DIII Ai unit
2-5 Di unit
2-6 Dio unit
3 *1 Interface for use in BACnet
3-1 Optional DIII board
3-2 Optional Di board
4 *2 Interface for use in LONWORKS
Parallel interface
5
Basic unit
Temperature
6
measurement units
Temperature
7
setting units
Unification adaptor for
8
computerized control
Note:
*1. BACnet
*2. LONWORKS
*3. Installation box for * adaptor must be procured on site.
242
Model No.
Note *2
DCS303A51
DCS302CA61
KJB311AA
DCS301BA61
KJB212AA
KEK26-1A
DST301BA61
*DTA102A52
* To use any of the above optional controllers, an appropriate adaptor must be installed on
*DTA107A55
*DTA103A51
DTA109A51
KRP4A92
Part name
Controller
P.P.D.
Web
128 units
256 units
Number of
units to be 512 units
connected
768 units
1024 units
P.P.D.
Web
Eco
®
®
®
is a registered trademark of American Society of Heating, Refrigerating and Air-
Conditioning Engineers (ASHRAE).
®
is a registered trade mark of Echelon Corporation.
Up to 16 groups of indoor units (128 units) can be easily controlled using the large LCD
panel. ON/OFF, temperature settings and scheduling can be controlled individually for
indoor units.
Up to 64 groups of indoor units(128 units) can be connected, and ON/OFF, temperature
setting and monitoring can be accomplished individually or simultaneously. Connectable up
to 2 controllers in one system.
Up to 16 groups of indoor units(128 units) can be turned, ON/OFF individually or
simultaneously, and operation and malfunction can be displayed. Can be used in
combination with up to 8 controllers.
Programmed time weekly schedule can be controlled by unified control for up to 64 groups
of indoor units (128 units). Can turn units ON/OFF twice per day.
Adaptors required to connect products other than those of the System to the high-speed
DIII-NET communication system adopted for the System.
the product unit to be controlled.
Up to 1024 units can be centrally controlled in 64 different groups.
Wiring restrictions (max. length : 1,000m, total wiring length : 2,000m, max. number of
branches : 16) apply to each adaptor.
Fixing plate for DTA109A51
Model No.
Air-Conditioning management system that can be controlled by
DCS601C51
a compact all-in-one unit.
DCS601A52
Additional 64 groups (10 outdoor units) is possible.
DCS002C51 P. P. D.: Power Proportional Distribution function
Monitors and controls the air conditioning system using the
DCS004A51
Internet and a Web browser application on a PC.
KJB411A
Wall embedded switch box.
DAM602B52
DAM602B51
Air conditioner management system that can be controlled by
DAM602B51x2
personal computers.
DAM602B51x3
DAM602B51x4
DAM002A51
Power Proportional Distribution function
Monitors and controls the air conditioning system using the
DAM004A51
Internet and a Web browser application on a PC.
DAM003A51
ECO (Energy saving functions.)
DAM101A51
External temperature sensor for intelligent Manager III.
DEC101A51
8 pairs based on a pair of On/Off input and abnormality input.
DEC102A51
4 pairs based on a pair of On/Off input and abnormality input.
Interface unit to allow communications between system and
DMS502B51
BMS. Operation and monitoring of air-conditioning systems
through BACnet® communication.
Expansion kit, installed on DMS502B51, to provide 2 more DIII-
DAM411B51
NET communication ports. Not usable independently.
Expansion kit, installed on DMS502B51, to provide 16 more
DAM412B51
wattmeter pulse input points. Not usable independently.
Interface unit to allow communications between system and
DMS504B51
BMS. Operation and monitoring of air-conditioning systems
through LONWORKS
Enables ON/OFF command, operation and display of
DPF201A51
malfunction; can be used in combination with up to 4 units.
Enables temperature measurement output for 4 groups; 0-
DPF201A52
5VDC.
DPF201A53
Enables temperature setting input for 16 groups; 0-5VDC.
Interface between the central monitoring board and central
* DCS302A52
control units.
Function
Function
®
communication.
SiBE28-805
Appendix