Configuring Sitop Psu8600 - Siemens SITOP PSU8600 Manual

7.5.6.3

Configuring SITOP PSU8600

You can change the following settings for the SITOP PSU8600 via the web server:
● Under "General"
– Prioritized buffering of output 1 enabled
– Outputs 1 and 2 connected in parallel
– Outputs 3 and 4 connected in parallel
– System start characteristics
– Prewarning threshold output current
– Prewarning threshold output currents in the MANUAL mode
– Dead time for system overload alarm
– Dead time for power supply failure alarm
● Under "PROFIenergy" you can activate and configure energy management with
PROFIenergy.
● Under "Buffering" you can change parameter settings and buffering properties.
● Under "Output" you can configure the outputs.
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
Engineering and remote access
7.5 Web server
183