Siemens SITOP PSU8600 Manual page 182

Engineering and remote access
7.5 Web server
User administration
Here, you can change the administrator password and set up the system so that guests can
access the system - and up to 14 additional user accounts with different authorization levels.
Procedure for changing the administrator password
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Communication interface > Web server".
3. Select entry "User administration".
4. In the editor area, under "Administrator" enter the current administrator password.
5. In the editor area, under "Password" enter a new password.
6. Repeat the new password.
7. Load the data to the device, see Loading the configuration (commissioning) (Page 170).
Procedure for setting up a guest access
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Communication interface > Web server".
3. Select entry "User administration".
4. In the editor area under "Add new user" enter the password and select the individual
access rights for a new user.
Procedure for setting up a user account
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Communication interface > Web server".
3. Select entry "User administration".
4. In the editor area under "Add new user" enter the password and select the individual
access rights for a new user.
182
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76