7.4.7
Firmware update
The firmware update process is described in detail in the "Firmware update readme", which
is provided with the firmware update download package. Please follow the instructions
provided there very carefully. The files for updating the firmware are available online at:
(https://support.industry.siemens.com/cs/ww/en/view/102295547)
7.4.8
Reset to factory settings
With STEP 7 Version 5.5, it is possible to restore the factory setting of modules using the
"Target system -> Edit Ethernet node".
Click the "Browse" button in the "Edit Ethernet node" dialog to select the MAC address of the
SITOP PSU8600 where the factory settings should be restored. Then click on the "Reset"
button. This deletes the IP address and the device name from the module.
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
Engineering and remote access
7.4 SIMATIC STEP 7
163