Siemens SITOP PSU8600 Manual page 217

Data
Channel1 operation
state
Channel2 Utarget
[10mV], Channel2
Ilimit
[10mA]...Channel2
operation state
Channel3 Utarget
[10mV], Channel3
Ilimit
[10mA]...Channel3
operation state
Channel4 Utarget
[10mV], Channel4
Ilimit
[10mA]...Channel4
operation state
LED color
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
Description
threshold value of the
output current, then the
output can be shut down
according to a current-
time characteristic ("elec-
tronic shutdown"), or the
load current can be lim-
ited to the response
threshold ("constant cur-
rent").
Operating state output 1
See data "Channel 1"
See data "Channel 1"
See data "Channel 1"
Actual LED color. Each
LED is represented by 2
bits:
1 = ModeModular Constant current: When
the response threshold
value is exceeded, the
load current is limited to
the response threshold
until this is fallen below
again.
0 = ManualOff Output switched off man-
ually (button):
1 = RemoteOff Output switched off
(PROFINET/IE):
2 = BufferOff Output switched off
3 = OverLoadOff Output switched off (over-
load):
4 = ReadyForRestart Output ready for reset
(reset):
5 = ErrorOff Output switched off (fault)
6 = Boot Output switched off (pow-
ering up)
7 = Running Output switched on (nor-
mal operation)
8 = OverLoad Output in overload opera-
tion:
9 = Limit Output current limited to
the response threshold:
10 = Overloaded Output in overload opera-
(SystemOverload) tion (with derating):
11 = LimitAfter Output current limited
(SystemOverload) (with derating)
0 LED is off
1 LED lit green
2 LED lit red:
Engineering and remote access
7.6 Cyclic and acyclic data
Data type
Unsigned8
Unsigned16
217