Activating the web server
Bring DIP switch "WEN" into the "ON" position (right) to activate the web server integrated in
the module.
Note
No write access when the connection is active
If the SITOP PSU8600 has an active connection to a control system (relation application),
then the parameters can only be read-accessed. It is still possible to update the firmware -
and save and delete the alarm list. If there is no active connection, then parameters can also
be write accessed via the web server.
You can find additional information about the integrated web server in ChapterWeb server
(Page 165).
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
Operator control at the device
3.9 Activating the web server on the module
73