2.2
Description of the expansion modules
Using a SITOP CNX8600 expansion module, the number of system outputs can be
increased, however, not the maximum output power of the basic device. The expansion
modules have, just like the basic device, a potentiometer for setting, and buttons to switch-
on and switch-off the relevant output. LEDs signal the operating states of the expansion
module as well as the individual outputs. A maximum of four expansion modules can be
used for each basic device. The connection to the basic device or to the adjacent module is
established using an integrated connecting plug.
Expansion module versions
Designation
4 × 5 A expansion module
4 × 10 A expansion module
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76
Number of outputs
4
4
Connecting plug at the upper side of the device for the plug connection to the basic device or
additional modules
Socket at the upper side of the device for the plug connection to additional modules
DC outputs
Ground connection
"OK" LED display
Buttons of the outputs with LEDs "ON/OFF/RST"
Voltage, current potentiometer
DIN rail slider
Convection
Clearance above/below
Description, device design, dimension drawing
2.2 Description of the expansion modules
Max. current per output
5 A
10 A
Article No.
6EP4436-8XB00-0CY0
6EP4437-8XB00-0CY0
15