Siemens SITOP PSU8600 Manual page 174

Engineering and remote access
7.5 Web server
Reset system
The PSU8600 can be reset using the "Reset system" function. "Reset system" has the
following effects:
● All outputs (basic device and expansion modules) are briefly shut off
● Buffering is briefly deactivated
The system starts up again after the system is reset. All supplementary modules are
internally addressed, the system configuration checked and the PROFINET connection to
the control reestablished.
Using a system reset, it is not possible to switch-on outputs again after an automatic
shutdown. Only outputs that were switched off after a firmware update are switched-on
again.
Procedure
1. Select menu "Diagnostics".
2. Select submenu "Online functions".
3. Select the "Reset system" entry.
4. In the editor area, click on "Reset system".
5. Acknowledge the confirmation prompt with "OK".
Reset to factory settings
A reset to the factory settings deletes all hardware and software configurations stored in the
SITOP PSU8600 and restores the factory settings.
This affects, for example:
● IP address
● Device name
● Parameter values for the SITOP PSU8600 and assigned supplementary modules.
Procedure
1. Select menu "Diagnostics".
2. Select submenu "Online functions".
174
PSU8600power supply systems
Manual, 04.2016, A5E35883207-7-76