Using The Edge Blending Feature - Christie DWU1052 User Manual

Using the EDGE BLENDING feature

1. Mode (Manual/Camera)
OFF: Disables the Blending function.
Manual: Allows you to adjust Blending Region or Blending Level by using menu.
Camera: Allows you to perform automatic adjustment by using Camera in Projector
Blending Tool.
• ECO MODE is not selectable when Blending is set to other than OFF.
• Keystone/3D Keystone/Warping are not selectable when Camera is selected in
Blending.
• Camera Feedback (BLENDING) function is operated by using dedicated PC tool,
"Blending Tool".
PC and projector are required to be connected with LAN cable in order to use this
function.
You can get the PC tool from the URL below.
http://www.christiedigital.com
Refer to Application Manual for operations.
2. Blending Region
2.1 Specifying Blending Region
Select one of the four sides with ▲/▼/◄/► buttons and press ENTER or INPUT
button. Blending Region can be specifi ed for left and right sides with ◄/► but-
tons and for top and bottom sides with ▲/▼ buttons.
Specify Blending Region for each projector.
Adjust them referring to the guide displayed during the adjustment of Blending
Region.
* The minimum value of Blending Region is 200 dots.
Left Image
(continued on next page)
DWU1052/DHD1052
User's Manual - Operating Guide
Blend Region
Guide line
Right Image
41
Operating
020-000854-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052