Fastening The Adapter Cover - Christie DWU1052 User Manual

Fastening the adapter cover

When using the USB wireless adapter, use the supplied adapter cover to avoid
possible burns.
USB wireless adapter: USB-WL-11N-NS
1.
Loosen the screw on the bottom left of the WIRELESS port.
2.
Insert the tab of the cover into the hole at the upper right of the WIRELESS
port in the direction of the arrow.
3.
Align the screw holes on the projector and the cover. Then insert the screw
removed from the projector into the hole and tighten the screw.
WARNING
to put in the mouth.
►Heat may build up in the USB wireless adapter, to avoid possible burns
disconnect the projector power cord for 10 minutes before touching the adapter.
DWU1052/DHD1052
User's Manual - Operating Guide
Temperature range: 0 ~ 45°C(operating)
►Keep small parts away from children and pets. Take care not
19
Setting up
Tab
020-000854-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052