Power On/Off - Christie DWU1052 User Manual

Power on/off

Power on/off
Turning on the power
1.
Make sure that the power cord is
firmly and correctly connected to the
projector and the outlet.
Make sure that the POWER indicator
2.
is lighted in steady orange (109).
Press STANDBY/ON button on the projector
3.
or the ON button on the remote control.
The projection lamp will light up and the POWER indicator will begin blinking
in green. When the power is completely on, the indicator will stop blinking and
light in steady green (109).
To display the picture, select an input signal according to the section Selecting an
input signal (31).
Turning off the power
1.
Press the STANDBY/ON button on the projector or the STANDBY button on
the remote control.
The message "Power off?" will appear on the screen for about five seconds.
2.
Press the STANDBY/ON or STANDBY button again while the message
appears. The projector lamp will go off, and the POWER indicator will begin
blinking in orange. The POWER indicator stops blinking and lights in a steady
orange when the lamp cooling is complete (109).
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings, as the projection ray may cause a trouble on
your eyes.
►Keep objects away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in fire or smoke.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, as it is too hot.
NOTE
• Turn the power on/off in the right order. Power on the projector prior
to the connected devices.
• This projector can automatically turn on/off. Refer to the DIRECT POWER ON
(83) and AUTO POWER OFF (83) items of the OPTION menu.
DWU1052/DHD1052
User's Manual - Operating Guide
►A strong light is emitted when the projector's power is on.
ON button
STANDBY button
30
POWER indicator
STANDBY/ON
button
020-000854-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052