Operating; Selecting An Input Signal - Christie DWU1052 User Manual

Operating

Selecting an input signal

1.
Activate your signal source. Turn the signal source on, to send signal to the
projector.
2.
Press the INPUT button on the projector.
When you press the button, the projector switches its input port in turn.
You can also use the remote control to select an input signal.
Select from the buttons for input ports as the following.
COMPUTER IN
LAN
INPUT button
NOTE
• If you have set SKIP to some ports from SOURCE SKIP in the
OPTION menu, the input from the ports cannot be selected (82).
• While ON is selected for AUTO SEARCH item in OPTION menu, the projector
will keep checking the ports in the above order repeatedly until an input signal is
detected (82).
DWU1052/DHD1052
User's Manual - Operating Guide

HDMI 1
VIDEO SDI/DIGITAL 1
31
  DVI-D
HDMI 2
HDBaseT
Buttons for input ports
Operating
020-000854-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052