Input Menu - Christie DWU1052 User Manual

INPUT menu

INPUT menu
Select an item from the Input menu using the ▲/▼
cursor buttons, and press the ► cursor button or
ENTER button to execute the item. Then perform it
according to the following table.
Item
PROGRESSIVE
NOISE
REDUCTION
COLOR SPACE
(continued on next page)
DWU1052/DHD1052
User's Manual - Operating Guide
Using the ▲/▼ buttons switches the progress mode.
TV  FILM  OFF
• This function works only for a video signal, component video signal (of
480i@60 or 576i@50 or 1080i@50/60), an HDMI
or 576i@50 or 1080i@50/60), HDBaseT™ signal (of 480i@60 or
576i@50 or 1080i@50/60), DVI-D signal (of 480i@60 or 576i@50 or
1080i@50/60) and SDI/DIGITAL signal (of 480i@60 or 576i@50 or
1080i@50/60).
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. If this occurs, select OFF, even if the
screen image loses sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH  MID  LOW
• This function works only for a video signal, component video signal
(of 480i@60 or 576i@50 or 1080i@50/60), an HDMI signal (of
480i@60 or 576i@50 or 1080i@50/60), HDBaseT signal (of 480i@60
or 576i@50 or 1080i@50/60), DVI-D signal (of 480i@60 or 576i@50
or 1080i@50/60) and SDI/DIGITAL signal (of 480i@60 or 576i@50 or
1080i@50/60).
Using the ▲/▼ buttons switches the mode for color space.
AUTO  RGB  SMPTE240  REC709  REC601
• This item can be selected only for a computer signal (except for
signals from the LAN ports) or a component video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work correctly at some signals. If
this occurs, select a suitable mode except AUTO.
Description
64
TM
signal (of 480i@60
020-000854-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052