Table of Contents
Advertisement
Set Alternating Time/Date - XR Classic Series
To set the display to alternate between Time and Date, place the HR OFFSET - Time/Date switch 8 to the up position, as
illustrated below.
Figure 5: Alternating/Time Date
Set Display to 24-Hour Time - XR Classic Series
To set the display to 24-hour time: for a 2.5" display set the HR Offset, 12/24 HR switch (7) in the up position and for a 4"
display set the HR Offset, 12/24 HR switch (1) in the up position, as illustrated below.
Figure 6: 24-Hour time
Set PM /Indicator - XR Classic Series
To set the PM dot indicator for a 2.5" display set the PM switch (3) to the UP position and for a 4" display set the PM
switch (6) to the UP position, as illustrated below.
Figure 7: Activate PM/Indicator
Set Offset Hours - XR Classic Series
The clock/timer displays the time received from the transmitter. The hour offset is for application use where the
clock/timer is set to display the time for another time zone.
By moving the appropriate "HR OFFSET" dip switch(s) and the direction (+/-) dip switch, any full-hour time can be
displayed. The "HR OFFSET" switch designates how many hours are offset from the current transmitter time zone.
The clock reads the hour offset on start up, when the RESET button is pushed, and each time the clock receives data from
the transmitter for the offset hours to go into effect.
Set Audible Buzzer (Timer Models Only) - XR Classic Series
The audible buzzer is only on the count-up and count-down timer function. To enable the buzzer feature, place the
OPTIONS - Buzzer switch (8) in the up position, as illustrated below.
Primex Wireless
XR Classic Series Digital Clock/Timers Installation Guide
11
Advertisement
Table of Contents
