Primex XR Classic Series Installation Manual page 9

Down counters can count from 99:59:59 to 00:00:00. The display flashes every second and the clock beeps for 3
l
seconds when 00:00:00 is reached.
Audible Tone Option
Only on the count-up and count-down functions
l
Frequency 3KHz +/-0.5KHz
l
Timer Switch Control
Switch control allows the user to run, hold, or reset the timer
l
Designed to fit inside a single gang box (not included); boxes are typically 2 1⁄4" x 2 3⁄4" x 4" (11.45cm x 6.99cm x
l
10.15cm)
Cable connector is a standard 15' (4.6m) CAT5 network cable with an RJ-45 connector
l
Cable connector is a 15' (4.6m) reversed wire (cross-pinned) telephone cable with an RJ-11 connector
l
Timer function is triggered by the use of the switch control
l
Switch control can simultaneously activate two connected timers for even more accurate time management
l
Buttons are cleanable with water and most common disinfectants. Be sure to test any cleaning solutions on a
l
small area
Figure 1: Timer Switch Control
Primex Wireless
XR Classic Series Digital Clock/Timers Installation Guide
9