Table of Contents
Advertisement
Remove Surface-mount Clock/Timer with Wall Bracket
2.5" x 4 and 2.5" x 6: From the top of the wall bracket, using a screwdriver press each hook down to release the
l
clock. Then pull out to unsnap bottom hinges.
4" x 4 and 4" x 6: From the top of the wall bracket, insert a thin screwdriver into each notch and gently move
l
the screwdriver sideways to unlock the clock. Then pull clock forward and up to unsnap. Lift out.
Remote Antenna Installation
Materials Supplied
Ref.
1
2
3
4
5
6
7
8
Additional Cable Accessories
5m (16.5') Cable extension with BNC adapter
l
Install Remote Antenna
1. Connect one end of cable #2 to connector #5. Push connector on and turn connector 1/4 turn to lock in place.
2. Right angle connector #6 is for horizontal bracket mounting. Remove connector #6 for vertical mounting of
bracket.
NOTE: Antenna must be vertical.
3. For vertical mounting, connect antenna #7 to the other end of connector #5. For horizontal mounting, connect
antenna #7 to right angle connector #6.
4. Use two screws (Items #4) to secure bracket #3.
Primex Wireless
Description
Connector with solder terminals
Cable 4.5 meters (15 foot)
Remote mounting bracket
Screws (2) for mounting bracket
Connector
Right angle connector
Antenna
Flat Washer
XR Classic Series Digital Clock/Timers Installation Guide
Figure 16: Remote Antenna Illustration
21
Advertisement
Table of Contents
