Code Blue Count Mode; Digital Programable Timer Operation - Primex XR Classic Series Installation Manual

Table 7: Set State Operating Specifications
Pressing the button...
DISPLAY
EXIT
STOP/START
INCREMENT
RESET
SET/CHANGE

Code Blue Count Mode

Code Blue Count Mode Operating Specifications
Pressing the button...
DISPLAY
EXIT
RESET
SET/CHANGE
STOP/START
INCREMENT
NOTE: If the code blue counter reaches 99:59:59, the counter will stop.
D P
IGITAL
The Programmable Countdown Timer counts down in minutes and seconds at a predefined schedule of timed events from
1 minute to 99 minutes 59 seconds. The countdown schedule and events are configured and managed using the Primex
Wireless Event Scheduler Pro Software and the schedule is downloaded to the system transmitter. For details on using the
software, please see the Event Scheduler Pro User Guide.
Primex Wireless
Start Count-Up Mode
Exits Set State
Increments the selected digit
Holding the SET/CHANGE button for
3 seconds enters the set mode,
which is indicated by " _ _:_ _ _ _" on
the display.
The selected digit will blink.
Pressing SET/CHANGE again to
select the next digit.
Running Mode
Ignored
Holding down DISPLAY for a minimum of four seconds shows the last code
blue time.
Ignored
Halts the code blue count at the
moment the button is pressed
T
ROGRAMABLE IMER
XR Classic Series Digital Clock/Timers Installation Guide
O
PERATION
Start Count-Down Mode
Exits Set State
Increments the selected digit
Holding the SET/CHANGE button for
3 seconds enters the set mode,
which is indicated by " _ _:_ _ _ _" on
the display.
The selected digit will blink.
Pressing SET/CHANGE again to
select the next digit.
Halted Mode
Places display back in clock mode
Ignored
Ignored
34