Table of Contents
Advertisement
Figure 26: Digital Clock/Timer Circuit Board Screws
6. Disconnect the circuit board power connector (A) and timer input connector (B).
Figure 27: Power Cord Connector and Timer Input Connector
7. Route the AC power wire (A) through the back of the clock.
8. For timer models only, route the timer input wires (B) through the back of the clock.
Figure 28: Route Wires
9. Wire the AC power.
10. For timer models only, wire the timer input as specified below.
Primex Wireless
XR Classic Series Digital Clock/Timers Installation Guide
28
Advertisement
Table of Contents
