Wells M4200 Owner's Manual page 18

PROGRAMMING INSTRUCTIONS (continued)
IMPORTANT: This oven is pre-programmed from the factory and does not require
programming adjustments under normal circumstances. Any programming
changes must be performed by qualified persons only.
CHANGE SETTINGS for name, cooking time, cooking temperature and cooling time
NOTE: Cannot go into edit or view program mode when cooling timer s activated or when in a bake cycle.
ACTION
1) Enter programming mode, press and
hold PROG button for 5 seconds
2) Press PROG button until EDIT menu
is reached
3) Press #2 or #8 button to select YES
4) Press PROG button
See page 22 for password and recommended oven settings
5) Press PROG button
6) Press PROG button
7) Press desired menu button. Display will read
menu item selected.
8) Press PROG button. Display will read menu name
with flashing cursor.
Can now change product name
NOTE: When programming in a new name,
flashing cursor indicates letter to be changed.
Using the alpha designations on the keypad
enter in the first letter. Cursor will automatically
move to the next letter. Continue in this manner
until the name of the menu item is completely
entered. To change letters use the arrow in the
VIEW /TEMP temp button to move the cursor
to the right, or the arrow in the UTILITY button
to move the cursor to the left.
9) Press PROG button
If ENABLE YES button can be used during normal operation
If ENABLE NO button has no function during normal operation
10) Press PROG button.
If CANCEL MANUAL, the audible alarm will sound until the door is opened or CANCEL is pressed.
If CANCEL AUTO, the audible alarm will time out.
11) Press PROG button and enter cook time
12) Press PROG button. Enter desired temperature
DISPLAY WILL READ
CAL TEMP
EDIT MENU ITEM
EDIT MENU
PASSWORD
SELECT DAYPART
SEL->
BISCUITS
BISCUITS
CHANGING THE NAME
ENABLE
CANCEL
COOK TIME
COOK TEMP
16
NO
NO
YES
0000
# 1
YES
A/M MANUAL
00:00
000