TABLE OF CONTENTS DESCRIPTION PAGE Warranty Statement Shipping Damage Claim Procedure Warnings Installation Instructions Operation Instructions for Oven 6 - 7 Cleaning Instructions for Oven Suggested Temperatures for Baking and Roasting Controls and Functions 9 -10 Operation Instructions for Cooktop Model OC-4TC Cleaning Instructions for Cooktop Model OC-4TC...
God. It, also, does not apply if the serial nameplate has been removed or service is performed by unauthorized personnel. The prices charged by Wells for its products are based upon the limitations in this warranty.
SHIPPING CLAIM PROCEDURE: For your protection, please note that equipment in this shipment was carefully inspected and packed by skilled personnel before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of this shipment. IF SHIPMENT ARRIVES DAMAGED: VISIBLE LOSS OR DAMAGE - Be certain this is noted on freight bill or express receipt and signed by person delivering.
FOR YOUR SAFETY Wells Convection Ovens ore equipped with a grounded electrical plug. This grounded plug is part of a system that will protect you if something goes wrong with the electrical wiring in the oven. Be sure the grounded plug is plugged into a matching grounded receptacle.
INSTALLATION INSTRUCTIONS: Remove oven carefully from carton. IMPORTANT: Read all Installation Instructions carefully BEFORE starting installation. Carefully place the oven on its side, and thread the legs or casters into the matching threaded holes on the bottom of the oven. Raise the oven to an upright position, and adjust the feet to level the oven from front to back and side to side.
Program Cook Mode: Five (5) programmable keys are provided for presetting a time and temperature for each "PGM" key. To set the program, press and hold the appropriate "PGM" key (1-5) and turn the "TIME" and "TEMP" knobs to the desired time and temperature. When "PGM" key is released. the displayed time and temperature is stored in memory.
SUGGESTED TIMES AND TEMPERATURES FOR BAKING AND ROASTING TIME NUMBER PRODUCT TEMPERATURE (MINUTES) OF RACKS BREAD PRODUCTS Hamburger Rolls Bread -1 Pound Loaves 3 (12 loaves) Rolls 5 (60 rolls) Baking Soda Biscuits PIZZA PASTRIES Sheet Cake (2 ½ Ibs. per pan) Frozen Fruit Pies (46 oz.) 5 (10 pies) Frozen Fruit Pies (26 oz.
WELLS RANGE TOP OVEN MODEL NO. OC-4TC AND OC-4HC CONTROLS AND FUNCTIONS INFINITE SWITCHES (4 pcs) - Control corresponding range top element from "OFF" to" HIGH" heat. RANGE TOP ELEMENT SIGNAL LIGHT (4 PCS) WHITE - These are indicator lights that stays ON continuously when the infinite switch is turned to other than the "OFF"...
Page 10
OVEN POWER LIGHT (RED) - This light indicator is ON whenever power is available for the oven elements and/or oven blower motor. HEAT ON LIGHT (WHITE) - This light indicator comes ON simultaneously with the oven elements. OVEN POWER SWITCH - A three (3) position rocker switch. The top position will bring power available to oven elements and blower motor.
OVEN COOK TOP PROVIDED WITH COILED SWING TYPE HOTPLATE ELEMENTS MODEL OC-4TC OPERATING INSTRUCTIONS: Hotplate controls are equipped with an infinite switch for each cooking/heating element, allowing adjustable temperature setting (OFF, LOW to HI) per element. Control light glows when the heat is turned "ON", warning the operator to turn off the unit when not in use. "HIGH SPEED"...
OVEN COOK TOP PROVIDED WITH CERAMIC HOTPLATES MODEL OC-4HC IMPORTANT: TO OBTAIN THE BEST COOKING RESULTS WITH THE CERAMIC HOTPLATES, FOLLOW ALL INSTRUCTIONS CAREFULLY. CAUTION: CERAMIC SURFACE IS HOT UNTIL THE "HOT SURFACE" INDICATOR LIGHT SHUTS OFF. OPERATING INSTRUCTIONS: Before using the hotplate, polish the ceramic surface according to the instructions provided. Hotplates are equipped with an infinite switch for each cooking/heating element, allowing an adjustable temperature setting (OFF, LOW.
Page 13
Wipe entire unit down using a clean cloth/sponge and a mild detergent. WARNING: DO NOT SPLASH/POUR WATER ONTO THE CONTROL PANEL OR WIRING. POSSIBLE SHOCK HAZARD MAY RESULT AND UNIT MAY BE DAMAGED. IMPORTANT: DO NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON STAINLESS STEEL OR CERAMIC SURFACES.
All labor shall be performed during regular working hours. Overtime premium will be charged to the buyer. 10. All genuine Wells replacement parts are warranted for ninety (90) days from date of purchase on non-warranty equipment. This parts warranty is limited only to replacements of the defective part. Any use of non-genuine Wells parts completely voids any warranty.