Enter Programming Mode - Wells M4200 Owner's Manual

IMPORTANT: This oven is pre-programmed from the factory and does not require
programming adjustments under normal circumstances. Any programming
changes must be performed by qualified persons only.
ENTER PROGRAM MODE
NOTE: Oven must be turned ON. No cooling timer or bake cycle can be active.
Special Button Functions:
Scroll through the options by pressing the PROG button:
# 2 and #8 allows scrolling up or down; and, changes from yes or no
ACTION
1) To enter programming mode, press and hold
PROG button for 5 seconds
This option allows temperature calibration
2) Press PROG button
This option allows viewing programmed values of menu items
3) Press PROG button
This option allows changing programmed values of menu items
4) Press PROG button
This option allows changes to temperature scale and to set real-time clock
5) Press PROG button
This option allows history upload, read menu card, write menu card and restore defaults
6) Press PROG button
This option allows viewing of controller model number, BIOS program number and version,
operating system (O/S) number and version, and default menus
To EXIT PROGRAM MODE:
Press CANCEL button two (2) times.
Controller will revert to RUN mode
Button Designation:
# 1 BISCUITS
# 2 BAGELS
# 3 PIES
# 4 COOKIES
# 5 McGRIDDLES
# 6 SCRATCH BISCUITS (disabled where ready to bake biscuits are used)
# 7 Disabled for future menu options
# 8 Disabled for future menu options
# 9 Disabled for future menu options
# 0 Disabled for future menu options
PROGRAMMING INSTRUCTIONS
DISPLAY WILL READ
TEMP CAL
VIEW MENU ITEM
EDIT MENU
SERVICE MENU
TRANSFER MENU
SYSTEM INFO
OVEN READY
15
NO
NO
NO
NO
NO
NO