Rmon > Rmon Alarm Configuration; Rmon > Rmon Event Configuration - D-Link DGS-1210-12TS/ME User Manual

Me series, metro ethernet switch
Hide thumbs Also See for DGS-1210-12TS/ME:
Table of Contents

Advertisement

4 Configuration
Click Apply to make the configurations take effect.
RMON > RMON Alarm Configuration
The RMON Alarm Configuration page allows the user to configure the network alarms. Network alarms occur
when a network problem, or event, is detected.
The configuration contains the following fields:
Index (1 - 65535): Indicates a specific alarm.
Variable: Specify the selected MIB variable value.
Rising Threshold (0 ~ 2^31-1):
Rising Event Index (1 ~ 65535):
user defined RMON events.
Owner:
Displays the device or user that defined the alarm.
Interval (1 ~ 2^31-1):
Defines the alarm interval time in seconds.
Sample type: Defines the sampling method for the selected variable and comparing the value against the
thresholds. The possible field values are:
Delta value – Subtracts the last sampled value from the current value. The difference in the values
is compared to the threshold.
Absolute value – Compares the values directly with the thresholds at the end of the sampling
interval.
Falling Threshold (0 ~ 2^31-1):
Falling Event Index (1 ~ 65535):
user defined RMON events.
Click Apply to make the configurations take effect.
RMON > RMON Event Configuration
The RMON Event page contains fields for defining, modifying and viewing RMON events statistics.
The RMON Events Page contains the following fields:
Index (1~ 65535): Displays the event.
Description: Specifies the user-defined event description.
Type: Specifies the event type. The possible values are:
None – Indicates that no event occurred.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.128 - RMON > RMON Alarm Settings
Displays the rising counter value that triggers the rising threshold alarm.
Displays the event that triggers the specific alarm. The possible field values are
Displays the falling counter value that triggers the falling threshold alarm.
Displays the event that triggers the specific alarm. The possible field values are
Figure 4.129 - RMON > RMON Event Configuration
88

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents