Table of Contents
Advertisement
D-Link DGS-1100-10/ME User Manual
Security > Access Authentication Control > Authentication Policy Settings
This feature will enable an administrator-defined authentication policy for users trying to access the Switch.
When enabled, the device will check the Login Method List and choose a technique for user authentication
upon login.
Figure 4.101 – Security > Access Authentication control > Authentication Policy Settings
Authentication Policy: Use the drop-down menu to enable or disable the Authentication Policy on the
Switch.
Response Timeout (0 - 255): Set the time the Switch will wait for a response of authentication from the user.
The user may set a time between 0 and 255 seconds. The default setting is 30 seconds.
User attempts (1 - 255): Enter the maximum number of times the Switch will accept authentication attempts.
Users failing to be authenticated after the set amount of attempts will be denied access to the Switch and will
be locked out of further authentication attempts. Command line interface users will have to wait 60 seconds
before another authentication attempt. Telnet and web users will be disconnected from the Switch. The user
may set the number of attempts from 1 to 255. The default setting is 3.
Click Apply to implement configuration changes.
Security > Access Authentication Control > Application Authentication Settings
The Application Authentication Settings page allows you to configure switch configuration applications for
login at the user level and at the administration level utilizing a previously configured method list.
Figure 4.102 – Security > Access Authentication control > Application Authentication Settings
Application: Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for Telnet application and the WEB (HTTP) application.
Login Method List: Select an application for normal login on the user level, utilizing a previously configured
method list. The user may use the default Method List or other Method List configured by the user.
Enable Method List: Select an application for normal login on the user level, utilizing a previously
configured method list. The user may use the default Method List or other Method List configured by the user.
Click Apply to implement configuration changes.
Security > Access Authentication Control > Authentication Server Group
A server group is a technique used to group RADIUS server hosts into user-defined categories for
authentication using method lists. You may define the type of server group by protocol or by previously
defined server group. The Switch has three built-in Authentication Server Groups that cannot be removed but
can be modified.
To add a user-defined group to the list, click the Add button in the Authentication Server Group page.
6
6
3
3
Hide quick links:
Advertisement
Table of Contents
