Clean Racks; Replacing The Door Gasket - Thermador MES301HS Use And Care Manual

Clean racks

The racks can be removed for cleaning.
WARNING
9
RISK OF BURNS FROM HOT PARTS WITHIN THE
OVEN
Wait until the oven is cool.
Unhinging racks
NOTICE: Tilt the rack all the way to the front only until
you feel resistance because otherwise the appliance
sidewall will be bent.
Carefully press the front of the rack up until it unhinges
1.
and release it sideways from the bracket (image A).
Unhinge the rack from the bracket and remove it
2.
(image B).
$
Clean racks with dish detergent and dish sponge/
3.
brush
or
clean racks in the dish washer.
Reinserting racks
Insert the rack with the indentations facing up.
1.
Hook rack in back and push it back until it engages
2.
(image C).
Hook rack on the front bracket and press down until it
3.
engages and is horizontally secured in the appliance
(image D).
&
The racks each only fit on one side.
%
'

Replacing the Door Gasket

If the outer gasket on the oven door is defective, it must
be replaced. Replacement gaskets for the appliance can
be obtained through customer service. Provide customer
service with the appliance model and serial numbers.
Open the appliance door.
1.
Remove the old door gasket.
2.
Insert the new door gasket and tuck it in all the way
3.
around the door. The seam must be on the side of the
door.
Check the fit of the door gasket again, particularly in
4.
the corners.
27