Basic Settings - Thermador MES301HS Use And Care Manual

Basic Settings

The appliance features various basic settings present in
the factory. These basic settings can, however, be
changed as necessary.
You can restore the factory settigns to reverse any
changes.
The example is shown in the illustration:
Change the basic setting for the Cook Time signal from
short to long.
Touch and hold ON/OFF until the appliance turns on.
1.
Touch and hold INFO for approximately 4 seconds.
2.
The first basic setting
Basic Settings Table
The following basic settings can be changed:
Basic Setting
*
'‹‚
National code
'‹ƒ
Clock display
'‹„
Time
'‹...
Touchpad sound
'ܠ
Cook Time signal
'‹‡
Oven Autostart
'‹ˆ
Water hardness level
'‹‰
Calibration
*
'‹Š
Temperature units
'‚‹ *
Clock display mode
* If you change the basic settings, all Favorites settings are cleared (see: Favorites).
22
appears in the display.
'‹‚
Function
Preselection of units and clock display mode:
USA - °F, 12-hour mode, lbs.
Canada - °C, 24-hour mode, kg
When the appliance is off
Sets current time
Sound emitted when a touchpad is touched
Signal after Cook Timer ends
Autostart activated:
Oven does not restart after oven door is opened
Water hardness level setting for the Decalcify indicator - = softened
Resets calibration.
The appliance is recalibrated the next time Steam
mode is used at 210° F (100 °C).
Temperatures are indicated in °F. If you switch to °C,
"°C" also appears in the display.
The clock in the display appears in 12-hour or 24-hour
mode
Touch INFO repeatedly until the desired basic setting
3.
appears.
Use the settings dial to change the basic setting.
4.
Now you can touch INFO to select additional basic
settings and change them using the settings dial.
Touch and hold INFO for approximately 4 seconds. All
5.
changes have been saved.
Canceling Changes
Touch START/STOP. The changes are not saved.
Options
= none
‹
= USA
‚
= Canada
ƒ
= off
‹
= on
‚
= off
‹
= on
‚
= short
‚
= medium
ƒ
= long
„
= off
‹
= on
‚
= soft
‚
= average
ƒ
= hard
„
= very hard
...
= reset off
‹""
= reset on
‹Ÿ
= °F
‹
‚ = °C
‹ = 12-hour mode
= 24-hour mode
‚