Table of Contents
Advertisement
3-6
Configuring the Module
3. Click on the Generic Extra Data Config tab
the configuration data area. Enter the desired configuration data and
click OK when finished.
Figure 3.3 Data Area on Generic Extra Data Config Tab
The MicroLogix 1500 will download the configuration data to the
1769-SM1 when the controller is placed in run mode.
Entering MicroLogix 1500 Configuration Data using RSLogix 500
version 6.1 (or higher)
The configuration data is allocated and entered by performing the
following steps:
1. Double-click on I/O Configuration in the menu tree to open the I/O
Configuration window. Select the 1769-SM1 and click the Adv
Config command button. A screen with an Expansion General
Configuration tab
(Figure
3.4) will appear.
(Figure
3.3) to display
Advertisement
Table of Contents
