Setting Up The 1769-Adn - Allen-Bradley 1769-SM1 User Manual

7-4 ControlLogix w/1769-ADN DeviceNet Ladder Example Program

Setting Up the 1769-ADN

To configure the 1769-ADN for use with the example program using
RSNetWorx for DeviceNet (version 3.21), perform the following steps:
1. Double-click on the 1769-ADN adapter icon in the graphic view
window
(Figure
setting on the adapter is "2."
Figure 7.4 1769-ADN Adapter Image Screen
2. Select the Module Configuration tab screen
the remote ADN system by dragging and dropping components. In
the ladder example, the remote drop consists of an ADN, PA4 power
supply, SM1 module, and ECR end cap terminator.
(Figure 7.3) to display the 1769-ADN adapter image screen
7.4). For the system in the ladder example, the node address
(Figure 7.5) and build