Table of Contents
Advertisement
Configuring the Module
Chapter 3 provides instructions and information for configuring the
1769-SM1 module.
Topic
Configuration Tools
Configuration Methods
Controller Mode
Parameter Mode
Using the PowerFlex HIM
For a list of parameters, refer to
definitions of terms in this chapter, refer to the Glossary.
Configuration Tools
The 1769-SM1 module stores parameters and other information in its
own non-volatile memory. You must, therefore, access the module to
view and edit its parameters. The following tools can be used to access
the module parameters.
For DPI (PowerFlex)-Supported System:
Tool
DriveExplorer Software
(version 3.01 or higher)
DriveExecutive Software
(version 1.01 or higher)
PowerFlex HIM on PowerFlex drive
RSLogix 500
RSLogix 5000
For SCANport or DPI (PowerFlex)-Supported System:
Tool
RSLogix 500
RSLogix 5000
Page
Topic
3-1
Setting the I/O Configuration
3-2
Setting an Idle Action
3-2
Resetting the Module
3-13
Viewing the Module Configuration 3-18
3-14
Appendix
B,
Refer to...
http://www.ab.com/drives/driveexplorer, and
DriveExplorer online help (installed with the software
http://www.ab.com/drives/drivetools, and
DriveExecutive online help (installed with the software
Page 3-14
LG500-GR001...
9399-RLD300GR
Refer to...
LG500-GR001...
9399-RLD300GR
Chapter
Module
Parameters. For
3
Page
3-15
3-16
3-17
Advertisement
Table of Contents
