Allen-Bradley 1769-SM1 User Manual page 135

DPI Parameter Object
Instance Attributes
Attribute Access Name
ID Rule
7 Get DPI Online Read
Full
8 Get DPI Descriptor
9 Get/Set DPI Parameter
Value
10 Get/Set DPI RAM
Parameter Value
11 Get/Set DPI Link
12 Get Help Object
Instance
13 Get DPI Read Basic STRUCT of:
14 Get DPI Parameter
Name
15 Get DPI Parameter
Alias
16 Get Parameter
Processing Error
(1)
A CONTAINER is a 32-bit block of data that contains the data type used by a parameter value. If signed, the value
is sign extended. Padding is used in the CONTAINER to ensure that it is always 32-bits.
(2)
This value is used in the formulas used to convert the parameter value between display units and internal units.
Refer to Formulas for Converting on page
(3)
Do NOT continually write parameter data to NVS. Refer to the attention on
(Continued)
Data Type Description
STRUCT of:
BOOL[32] Descriptor (Refer to pages
(1)
CONTAINER Parameter value
CONTAINER Minimum value
CONTAINER Maximum value
CONTAINER Default value
WORD Next parameter
WORD Previous parameter
STRING[4] Units (e.g., Amp, Hz)
UINT Multiplier
UINT Divisor
UINT Base
INT Offset
BYTE[3] Link (source of the value) (0 = no link)
BYTE Always zero (0)
STRING[16] Parameter name
BOOL[32] Descriptor (Refer to pages
Various Parameter value in NVS.
Various Parameter value in temporary memory.
BYTE[3] Link (parameter or function block that is
the source of the value) (0 = no link)
WORD ID for help text for this parameter
BOOL[32] Descriptor (Refer to pages
CONTAINER Parameter value
CONTAINER Minimum value
CONTAINER Maximum value
CONTAINER Default value
STRING[16] Parameter name
STRING[4] Units (e.g., Amp, Hz)
STRING[16] Parameter name
STRING[16] Customer supplied parameter name. Only
supported by PowerFlex 700S at time of
publication.
BYTE 0 = No error
1 = Value is less than the minimum
2 = Value is greater than the maximum
C-11.
CIP/DPI Objects
C-10
(2)
(2)
(2)
(2)
C-10
(3)
C-10
page 5-10.
C-9
– C-11)
– C-11)
– C-11)