Table of Contents
Advertisement
Installing the Module
Chapter 2 provides instructions for installing the 1769-SM1 module as
an expansion I/O module on MicroLogix 1500 and CompactLogix
controllers, or with a remote 1769-based adapter.
Topic
Preparing for an Installation
Removing Power
Selecting the Configuration Mode
Assembling the Module to the Controller 2-3
Preparing for an Installation
Consider the following when installing the 1769-SM1 module:
• Verify that you have all required equipment. Refer to
Getting
• A MicroLogix 1500 Base Unit or Compact I/O power supply has
limits in the amount of +5V dc and +24V dc current it can supply to
modules in its I/O bank. These limits depend on the catalog number
(e.g. 1769-PA2) of the supply. A bank of modules must not exceed
the current limits of the MicroLogix 1500 Base Unit or I/O bank
power supply.
Refer to the MicroLogix 1500 User Manual (Publication No.
1764-UM001...), or the Compact 1769 Expansion I/O Power
Supplies Installation Instructions (Publication No. 1769-5.14).
• The 1769-SM1 module has a distance rating of six, therefore the
module must be within six modules of the I/O bank's power supply.
ATTENTION: Risk of equipment damage exists. The 1769-SM1
module contains ESD (Electrostatic Discharge) sensitive parts that can
!
be damaged if you do not follow ESD control procedures. Static control
precautions are required when handling the module. If you are
unfamiliar with static control procedures, refer to Guarding Against
Electrostatic Damage, Publication 8000-4.5.2.
Started.
Page
Topic
2-1
Mounting the Module
2-2
Grounding the Module
2-2
Connecting the Module to the Drive 2-9
Applying Power
2
Chapter
Page
2-4
2-8
2-9
Chapter
1,
Advertisement
Table of Contents
