Table of Contents
Advertisement
Glossary
G-5
drives can be used for applications ranging from 0.37 kW (0.5 HP) to
3,000 kW (4,000 HP). All PowerFlex 7-Class drives implement DPI.
R
Reference/Feedback
The Reference is used to send a setpoint (for example, speed, frequency,
torque) to the drive. It consists of one word of output to the 1769-SM1
from the network. The size of the word (either a 16-bit word or 32-bit
word) is determined by the drive.
Feedback is used to monitor the speed of the drive. It consists of one
word of input from the 1769-SM1 to the network. The size of the word
(either a 16-bit word or 32-bit word) is determined by the drive.
RSLogix 5/500/5000
RSLogix software is a tool for configuring and monitoring controllers to
execute logic and communicate with connected devices. It is a 32-bit
application that runs on various Microsoft Windows operating systems.
Information about RSLogix software can be found at http://
www.software.rockwell.com/rslogix.
RSNetWorx for DeviceNet
RSNetWorx for DeviceNet software is a tool for configuring and
monitoring DeviceNet networks and connected devices. It is a 32-bit
application that runs on various Microsoft Windows operating systems.
Information about RSNetWorx for DeviceNet software can be found at
http://www.software.rockwell.com/rsnetworx.
S
Scanner
A scanner is a separate module (of a multi-module controller) or a
built-in component (of a single-module controller) that provides
communication with 1769-SM1 modules connected to a network. See
also Controller.
SCANport
A peripheral communications interface used by various Allen-Bradley
drives and power products, such as 1305 and 1336 PLUS II drives.
SCANport Peripheral
A device that provides an interface between SCANport and a network or
user. Peripheral devices are also referred to as "modules" and "adapters."
The 1203-SSS converter and HIM are examples of SCANport
peripherals.
Advertisement
Table of Contents
