Light Sources - BMW S 1000RR Rider's Manual

through the shim in the brake-
9
caliper support and the rear
wheel.
176
Make sure that quick-release
axle meets the recess for key
surfaces.
z
Mount adjusting plate on left 1.
Install axle nut 2 with washer,
however do not tighten yet.
Fasten brake line in holder 2
and install screw 1.
Adjusting chain tension
( 190).

Light sources

Replacing light sources
for low-beam and high-
beam headlight
NOTICE
The alignment of the connector
may differ from the illustration
depending on the light source to
be replaced.
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Remove cover 1 to replace
light source for low-beam
headlight.