BMW S 1000RR Rider's Manual page 135

SETUP EQUIPMENT
in the
DWA AUTO
submenu with the
OFF
function.
Remove screw 4.
Remove anti-theft alarm
system 2 while unhooking at
bracket 3.
Disconnect connector 1 for
license-plate carrier.
Remove body-bound rivets 2
on left and right.
Remove bracket 3 for anti-theft
alarm system.
Remove screws 4 with wash-
ers 3.
Take off license-plate car-
rier 2 and thread out wiring
harness 1.
Install the passenger seat
( 62).
Install license-plate
carrier
Park motorcycle, ensuring that
support surface is firm and
level.
Remove passenger seat
( 62).
Position license-plate carrier 2
and thread in wiring harness 1.
Install screws 4 with wash-
ers 3.
Number-plate carrier to
rear frame
4 lb/ft (5 Nm)
7
133
z