Unlock protective cap or ter-
7
minating resistor and pull off
connector.
140
Mount special or racing acces-
sories.
NOTICE
Observe installation instructions
of special or racing accessories.
NOTICE
So that the wiring harness can
be correctly positioned and the
wiring harnesses with the con-
z
nectors are not routed under ten-
sion, the cable times must not be
tightened until the end.
ATTENTION
Penetration of dirt and mois-
ture in the open connector.
Malfunctions
Remount cover cap or termi-
nating resistor after removing
connector.
Remount cover cap or termi-
nating resistor after removing
connector.
Installing fairing side panel
(
184).
Install the passenger seat
(
62).
with passenger seat cover
Install hump cover (
OE
62).