BMW S 1000RR Rider's Manual page 184

9
182
Fit the screw 1.
Diode taillight
If the taillight LEDs have failed,
z
the taillight must be replaced. In
this case:
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
Replace license plate light
Pull license-plate light 1 out of
light housing.
Remove light source from
socket.
Replace defective light source.
Bulb for license-plate
light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the glass
surface, always use a clean, dry
cloth to hold the light source.
Press light source into socket.