BMW S 1000RR Rider's Manual page 76

5
Factory settings for
jounce/rebound at front
74
Position 4
Adjusting compression
damping (jounce) at rear
wheel
without Dynamic Damping
OE
Control (DDC)
z
Park motorcycle, ensuring that
support surface is firm and
level.
Adjust compression damping
with adjusting screw 1 and red
scale.
To increase damping: turn ad-
justing screw with tool from
onboard tool kit so that mark-
ing 2 points to a higher scale
figure.
To decrease damping: turn
adjusting screw with tool from
onboard tool kit so that mark-
ing 2 points to a lower figure
on the scale.
Compression stage, ba-
sic setting, rear
Position 2 (comfortable setting
with rider 187 lbs (85 kg))
Position 4 (standard setting
with rider 187 lbs (85 kg))
Position 9 (sport-oriented set-
ting with rider 187 lbs (85 kg))
Adjusting rebound-stage
damping at rear wheel
without Dynamic Damping
OE
Control (DDC)
Park motorcycle, ensuring that
support surface is firm and
level.