BMW S 1000RR Rider's Manual page 78

Park motorcycle, ensuring that
5
support surface is firm and
level.
76
Select submenu (
SETUP DDC-SYS
The
menu has been selected.
z
To adjust the rebound at the
rear wheel, briefly press TRIP 1
or SET 2 repeatedly until in
REAR
line 3 and in line 4
REB:
(Rebound) is displayed.
Press and hold SET 2.
The value next to
flashes.
Adjust damping as desired with
TRIP 1 and SET 2.
+1 ... +7
113). in a maximum of seven steps
(harder).
sub-
-1 ... -7
in a maximum of seven steps
(softer).
0
: Factory setting
Press and hold SET 2 until dis-
played value no longer flashes.
The value for the current riding
mode is saved.
To adjust the rebound at the
rear wheel, briefly press TRIP 1
or SET 2 repeatedly until in
line 3
COM:
played.
Press and hold SET 2.
The value next to
flashes.
REB:
Adjust damping as desired with
TRIP 1 and SET 2.
Press and hold SET 2 until dis-
played value no longer flashes.
: Damping increase
: Damping decrease
REAR
and in line 4
(Compression) is dis-
COM:
NOTICE
Damping is adjusted and saved
separately for all riding modes in
SETUP DDC-SYS
the
menu.
Damping is also adjusted and
saved separately for the DDC
DDC SPORT
modes ,
RACE DDC SLICK
and
USER
sible in the riding mode.
The value for the current riding
mode is saved.
Adjusting damping on
front wheel
with Dynamic Damping Control
OE
(DDC)
Adjustment is carried out in the
SETUP DDC-SYS submenu.
Park motorcycle, ensuring that
support surface is firm and
level.
Select submenu (
sub-
DDC
pos-
113).