Light Sources - BMW F 800 R Rider's Manual

Light sources

Replacing bulbs for low-
beam and high-beam
headlight
Park motorcycle, ensuring that
support surface is firm and
level.
Fold bulb mask downward
( 96).
Switch off ignition.
Pull off rubber cap with con-
nector 1 while bracing the light
source located under the rub-
ber cap 2.
Remove cover 3.
Remove wire spring 1 from
catch and fold to one side.
Remove bulb 2.
Replace defective light source.
Bulb for low-beam and
high-beam headlight
H4 / 12 V / 60/55 W
To protect the glass against
soiling, only grasp the light
source by the base.
Insert light source 1 while pay-
ing attention to the correct
alignment of the lug (arrow).
Close the spring clamp 2 and
lock it in place.
Install cover 3.
9
117
z