Front Wheel Stand - BMW S 1000RR Rider's Manual

5 without Dynamic Damp-
ing Control (DDC)
Rebound-stage damping
on front wheel (
without Dynamic Damp-
ing Control (DDC)
Adjusting rebound-stage
damping at rear wheel
( 74).
without Dynamic Damp-
ing Control (DDC)
Adjusting compression
damping (jounce) at rear
wheel ( 74).
6 Spare fuses with gripper
Miniature fuses, 4 A, 7.5 A
and 10 A
Puller for removing fuses
Replacement fuses
7 Plastic attachment
with Dynamic Damping
OE
Control (DDC)
Adjust spring preload on
front wheel (
8 TORX wrench, T25
8 Removing and installing
OE body panels.
Removing rider`s seat
73). (
OE

Front wheel stand

Installing the auxiliary
stand on the front wheel
ATTENTION
OE
Use of the BMW Motorrad
front wheel stand without an
additional center or auxiliary
stand.
Component damage caused by
tipping over.
Place the motorcycle on the
center stand or an auxiliary
stand before lifting it with the
BMW Motorrad front wheel
stand.
Place motorcycle on an auxil-
69).
iary stand; BMW Motorrad rec-
63).
ommends the BMW Motorrad
auxiliary stand.
Mounting rear-wheel stands
( 158).
Use basic stand (83 30 0 402
241) with mounting pieces (83
30 2 152 839).
9
157
z