BMW S 1000RR Rider's Manual page 103

The infrared receiver available
as an optional accessory must
be connected to the connector
for optional accessories under
the right-hand fairing side panel
( 138).
In the SETUP RACETRACK,
the LAPTIMER trigger mode
must be set to LAPTM TRIG
AUTO or LAPTM TRIG EX-
TERN ( 124).
Operation with the headlight
flasher button is also possible
with the integrated infrared re-
ceiver. For this purpose, the
LAPTIMER trigger mode must
be set to LAPTM TRIG AUTO or
LAPTM TRIG MANUAL.
To avoid the premature detection
of a completed lap due to inter-
ference signals, a minimum lap
time can be specified (
Signals received before this time
expires are then ignored.
Interrupting time entry
Time recording is running.
Press and hold TRIP 1 to inter-
rupt time recording.
Press and hold TRIP 1 to con-
tinue time recording.
Ending time entry
Time recording is running.
124).
Press and hold TRIP 1 to stop
time recording.
Briefly press button 2.
The indicated time is deleted:
--:--:--
Time recording is ended.
No lap time is saved.
Briefly press TRIP 1 to exit lap
timer.
NOTICE
If additional laps are recorded
at a later time, the numbering
of the laps is continued.
Numbering does not begin with
lap 1 again until after all laps
7
101
z