Light Sources; Trim Panel Components - BMW S 1000 RR Rider's Manual

Check to see whether a rivet
head 1 has rotated.
Rivet heads should be parallel
to the centerline of the drive
chain 2.
Riveting is OK.
If one or more rivet heads has
rotated:
Contact a repair shop,
preferably an authorized
BMW Motorrad dealer.

LIGHT SOURCES

Replacing the LED light
source
WARNING
Overlooking the vehicle in
road traffic due to failure of
the lighting on the vehicle
Safety risk
Replace defective lighting
as soon as possible. Please
contact a repair shop for
this purpose, preferably an
authorized BMW Motorrad
dealer.
All light sources on the ve-
hicle are LED light sources.
The service life of the LED
light sources is longer than
the assumed service life of
the vehicle. In case of a faulty
LED lamp, contact a repair
shop, preferably an authorized
dBMW Motorrad dealer.

TRIM PANEL COMPONENTS

Removing fairing side panel
The work steps described
here for the right side
trim panel also logically apply
to the left side.
217