Wheel Rims And Tires; Wheels - BMW S 1000RR Rider's Manual

9
Tire pressure, rear
168
42.1 psi (2.9 bar) (with tire
cold)
If tire pressure is too low:
Correct tire pressure.

Wheel rims and tires

Check wheel rims
Make sure ground is level and
firm and park motorcycle.
z
Subject wheel rims to visual
inspection for defects.
Have damaged rims checked
and, if necessary, replaced
by a specialist service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking tire tread depth
WARNING
Riding with heavily worn
tyres
Risk of accident due to poorer
rideability
If necessary, replace the tyres
before the legally specified
minimum tread depth is
reached.
Make sure ground is level and
firm and park motorcycle.
Measure tire tread depth in
main tread grooves with wear
indicating marks.
NOTICE
Tread wear marks are integrated
into the main grooves on every
tire. If the tire tread has worn
down to the level of the marks,
the tire is completely worn. The
locations of the marks are indi-
cated on the edge of the tire, e.g.
by the letters TI, TWI or by an
arrow.
When the minimum tread depth
is reached:
Replace tires concerned.

Wheels

Tire recommendation
For every size of tire,
BMW Motorrad has tested and
approved certain makes as
roadworthy. BMW Motorrad
cannot evaluate the suitability of
other tires, and can therefore
take no responsibility for their
driving safety.
BMW Motorrad recommends
only using the tires tested and
approved by BMW Motorrad.
Detailed information can be
obtained from your authorized
BMW Motorrad retailer or online
at "www.bmw-motorrad.com".