BMW S 1000RR Rider's Manual page 75

ing 2 points to higher figure on
scale.
To decrease damping: turn
adjusting screw with tool from
onboard tool kit so that mark-
ing 2 points to lower figure on
scale.
Compression stage, ba-
sic setting, front
Position 2 (comfortable setting
with rider 187 lbs (85 kg))
Position 4 (standard setting
with rider 187 lbs (85 kg))
Position 8 (sport-oriented set-
ting with rider 187 lbs (85 kg))
Rebound-stage damping
on front wheel
without Dynamic Damping
OE
Control (DDC)
Adjust rebound-stage damp-
ing with adjusting screw 1 and
yellow scale on right-hand fork
leg.
To increase damping: turn ad-
justing screw with tool from
onboard tool kit so that mark-
ing 2 points to a higher scale
figure.
To decrease damping: turn
adjusting screw with tool from
onboard tool kit so that mark-
ing 2 points to a lower figure
on the scale.
Rebound stage, basic
setting, front
Position 2 (comfortable setting
with rider 187 lbs (85 kg))
Position 4 (standard setting
with rider 187 lbs (85 kg))
Position 7 (sport-oriented set-
ting with rider 187 lbs (85 kg))
Factory settings at front
wheel
Use following specification data
to adjust to factory settings.
5
73
z