Removing Front Wheel - BMW S 1000RR Rider's Manual

Hide thumbs Also See for S 1000RR:
Table of Contents

Advertisement

Affect of wheel sizes
on suspension control
systems
The wheel sizes play a major role
in the ASC and DTC suspension-
control systems. The diameter
and width of the wheels stored
in the control unit have particular
significance as the basis for all
necessary calculations. A change
in these sizes resulting from con-
version to wheels not installed
as standard equipment can seri-
ously affect the control efficiency
of these systems.
The sensor rings required for
wheel speed detection must also
match the installed control sys-
tems and may not be replaced.
If you want to equip your
motorcycle with different wheels,
please contact a specialist
service facility, preferably a
BMW Motorrad retailer. In some
cases the data stored in the
control units must be adapted to
the new wheel sizes.

Removing front wheel

Park motorcycle, ensuring that
support surface is firm and
level.
Remove screw 1 and take
wheel speed sensor out of
bore.
Mask off areas of wheel rim
that could be scratched in the
process of removing the brake
calipers.
ATTENTION
Pressing together the brake
pads with the brake caliper
removed.
The brake caliper cannot be
mounted over the brake disc.
Do not operate the brake
lever with the brake caliper
removed.
Remove screws 1 of brake
calipers on left and right.
9
169
z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents