BMW S 1000RR Rider's Manual page 58

with Pro riding modes
4
USER
: Riders can combine
the settings from all available
56
functions (ENGINE, ABS, DTC
and DDC) in any way they
wish, according to their pref-
erences or current prevailing
conditions. A technical un-
derstanding of the settings
is assumed (only with coding
plug installed, see the chapter
"Technology in detail").
z
The riding mode selected and
its associated engine-charac-
teristic, ABS DTC and DDC
settings are retained even after
the ignition has been switched
off.
When selecting
ing mode: Observe restricted
ABS control intervention at rear
wheel (see chapter "Technol-
ogy in detail").
The values set in the
USER-MODE
OE ually displayed, but instead only
after the following events for a
limited time:
After every pre-ride check with
USER riding mode active.
After changing to USER riding
mode.
When 1 (MODE) button is
pressed in USER riding mode
without changing riding mode.
Install coding plug
with Pro riding modes
Increased engine perfor-
mance in all riding modes
by inserting the coding plug
SLICK
rid-
on motorcycles with power
reduction.
Accident hazard
Familiarize yourself with the
more performance-oriented
SETUP
response.
are not contin-
OE
WARNING
Do not use the encoding plug
on public roads.
Switch off ignition (
Removing rider`s seat (
ATTENTION
Penetration of dirt and mois-
ture in the open connector.
Malfunctions
After removing the encoding
plug, refit the cover cap.
Remove cap 1 of connector.
41).
63).